Oxymitter 4000, Instruction manual – Emerson Process Management OXYMITTER 4000 IM-106-340 User Manual
Page 24
Advertising
Oxymitter 4000
1-6
Instruction Manual
IM-106-340, Rev. 4.0
May 2006
Figure 1-3. Membrane Keypad
4. An optional Local Operator Interface, Figure 1-4, allows continuous O
2
display and full interface capability.
Figure 1-4. Local Operator
Interface (LOI)
5. Field replaceable cell, heater, thermocouple, and diffusion element.
6. The Oxymitter 4000 is constructed of rugged 316 L stainless steel for all
wetted parts.
7. The electronics are adaptable for line voltages from 90-250 VAC;
therefore, no configuration is necessary.
DIAGNOSTIC
ALARMS
TEST
POINTS
HEATER T/C
HEATER
02 CELL
CALIBRATION
CALIBRATION RECOMMENDED
02 CELL mV +
02 CELL mv -
HEATER T/C +
HEATER T/C -
INC
INC
DEC
DEC
HIGH
GAS
LOW
GAS
CAL
TEST GAS +
PROCESS -
% 02
MEMBRANE
KEYPAD
37260003
37260004
Advertising