Emerson Process Management OXYMITTER 4000 IM-106-340 - Manual (Page 47)

Instruction Manual
IM-106-340, Rev. 4.0
May 2006
2-9
Oxymitter 4000
Figure 2-7. Orienting the
Optional Vee Deflector
8. If insulation is being removed to access the duct work for Oxymitter
4000 mounting, make sure the insulation is replaced afterward
(Figure 2-8).
Remote Electronics
Installation For an Oxymitter 4000 equipped with remote electronics, install the probe
according to the instructions in "Probe Installation". Install the remote
electronics unit on a stand pipe or similar structure, Figure 2-2.
Vee
Deflector
Vee
Deflector
Diffusion
Element
Setscrew
Filter
Gas Flow
Direction
Apex
22220020
Uninsulated stacks or ducts may cause ambient temperatures around the electronics to
exceed 185°F (85°C), which may cause overheating damage to the electronics.