Verifying the configuration – H3C Technologies H3C S5560 Series Switches User Manual

Page 145

Advertising
background image

129

<SwitchA> system-view

[SwitchA] bfd echo-source-ip 1.1.1.1

[SwitchA] ip prefix-list abc index 10 permit 4.4.4.4 32

[SwitchA] route-policy frr permit node 10

[SwitchA-route-policy-frr-10] if-match ip address prefix-list abc

[SwitchA-route-policy-frr-10] apply fast-reroute backup-interface vlan-interface

100 backup-nexthop 12.12.12.2

[SwitchA-route-policy-frr-10] quit

[SwitchA] ospf 1

[SwitchA-ospf-1] fast-reroute route-policy frr

[SwitchA-ospf-1] quit

# Configure Switch B.

<SwitchB> system-view

[SwitchB] bfd echo-source-ip 4.4.4.4

[SwitchB] ip prefix-list abc index 10 permit 1.1.1.1 32

[SwitchB] route-policy frr permit node 10

[SwitchB-route-policy-frr-10] if-match ip address prefix-list abc

[SwitchB-route-policy-frr-10] apply fast-reroute backup-interface vlan-interface

101 backup-nexthop 24.24.24.2

[SwitchB-route-policy-frr-10] quit

[SwitchB] ospf 1

[SwitchB-ospf-1] fast-reroute route-policy frr

[SwitchB-ospf-1] quit

Verifying the configuration

# Display route 4.4.4.4/32 on Switch A to view the backup next hop information.

[SwitchA] display ip routing-table 4.4.4.4 verbose

Summary Count : 1

Destination: 4.4.4.4/32

Protocol: OSPF Process ID: 1

SubProtID: 0x1 Age: 04h20m37s

Cost: 1 Preference: 10

Tag: 0 State: Active Adv

OrigTblID: 0x0 OrigVrf: default-vrf

TableID: 0x2 OrigAs: 0

NBRID: 0x26000002 LastAs: 0

AttrID: 0xffffffff Neighbor: 0.0.0.0

Flags: 0x1008c OrigNextHop: 13.13.13.2

Label: NULL RealNextHop: 13.13.13.2

BkLabel: NULL BkNextHop: 12.12.12.2

Tunnel ID: Invalid Interface: Vlan-interface200

BkTunnel ID: Invalid BkInterface: Vlan-interface100

# Display route 1.1.1.1/32 on Switch B to view the backup next hop information.

[SwitchB] display ip routing-table 1.1.1.1 verbose

Summary Count : 1

Advertising
This manual is related to the following products: