Is-is route redistribution configuration example, Network requirements – H3C Technologies H3C S5560 Series Switches User Manual

Page 187

Advertising
background image

171

----------------------------

System Id: 0000.0000.0002

Interface: Vlan-interface100 Circuit Id: 0000.0000.0001.01

State: Up HoldTime: 25s Type: L1 PRI: 64

System Id: 0000.0000.0001

Interface: Vlan-interface100 Circuit Id: 0000.0000.0001.01

State: Up HoldTime: 7s Type: L1 PRI: 100

[SwitchC] display isis interface

Interface information for IS-IS(1)

----------------------------------

Interface: Vlan-interface100

Id IPv4.State IPv6.State MTU Type DIS

001 Up Down 1497 L1/L2 No/No

# Display information about IS-IS neighbors and interfaces on Switch D.

[SwitchD] display isis peer

Peer information for IS-IS(1)

----------------------------

System Id: 0000.0000.0001

Interface: Vlan-interface100 Circuit Id: 0000.0000.0001.01

State: Up HoldTime: 9s Type: L2 PRI: 100

System Id: 0000.0000.0002

Interface: Vlan-interface100 Circuit Id: 0000.0000.0001.01

State: Up HoldTime: 28s Type: L2 PRI: 64

[SwitchD] display isis interface

Interface information for IS-IS(1)

----------------------------------

Interface: Vlan-interface100

Id IPv4.State IPv6.State MTU Type DIS

001 Up Down 1497 L1/L2 No/No

IS-IS route redistribution configuration example

Network requirements

As shown in

Figure 42

, Switch A, Switch B, Switch C, and Switch D reside in the same AS. They use IS-IS

to interconnect. Switch A and Switch B are Level-1 routers, Switch D is a Level-2 router, and Switch C is a
Level-1-2 router.
Redistribute RIP routes into IS-IS on Switch D.

Advertising
This manual is related to the following products: