Grass Valley Kaleido-X v.7.80 - Manual (Page 117)

109
Kaleido-X
User’s Manual
The RTSP Stream Configuration window appears.
4 In RTSP Stream Configuration, replace the default stream name if desired, type the
URL of the stream you wish to monitor, select the appropriate protocol (RTP, UDP), and
then click OK.
The Kaleido-IP establishes a connection with the selected stream. All programs that are
part of the stream, and the elementary streams included in these programs,
automatically appear under the transport stream element.
5 Repeat this procedure until you have added all required RTSP transport streams to your
system configuration.
6 On the File menu, click Save. Alternatively, click the Save button on the toolbar.
Changes to the system are saved.
Notes
• The Kaleido-IP does not yet support RTSP streams containing raw
elementary streams.
• The Kaleido-X software supports UTF-8 encoded stream names. The only
characters, which cannot be used in a stream name are: @ / \ ' and " .
• Verify the protocol you selected. Registering an RTP stream as UDP instead
of RTP may result in the decoded video appearing jerky or accelerated on
the monitor wall.
• Under the network adapter elements, transport streams are listed in
alphabetical order.