Grass Valley PVS Series System Guide v.4.0 Dec 10 200 - Manual (Page 127)

Viewing video input status
July 27, 2001 Profile XP System Guide 127
Viewing video input status
You can use Configuration Manager to check the status of the video input signal.
To check video input status:
1. Choose Video Input in the Configuration Manager window. The Video Input
dialog box appears.
2. Select a video input from the Video Input list. The following table gives a
description of the video input status indicators:
Status Indicators Description
Embedded Audio Status Indicates which embedded audio groups
are present on the video input.
Video input status Indicates the status of the video input
signal.
VITC timecode status Indicates the status of VITC timecode on
the video input. May require setting up the
VITC reader on page 2 of the Video Input
dialog box.
Ancillary data status:
Checksum and Parity
Indicates the status of the data extracted
from the ancillary data space.