Grass Valley PVS Series System Guide v.4.0 Dec 10 200 - Manual (Page 84)

Chapter 3 Working with Profile XP storage systems
84 Profile XP System Guide July 27, 2001
steps, otherwise, proceed to step 4.
a. Select all Unbound LUNs using SHIFT or CTRL and click.
b. Verify the LUN type selected is Data .
c. Click Bind , then click OK in the dialog box.
The list now shows the Unbound LUN status as Bind Pending.
4. Click Next to navigate to page 2 of 3.
5. Enter the file system volume name, or use the default name.
6. Click Finish . The summary dialog box appears.
7. Select Rebuild the file system , then click OK in the Summary dialog box.
8. Read the warning message, then click OK to bind all unbound LUNs and create a
file system.
- Binding 18 GB drives - approximately one hour
- Binding 36 GB drives - approximately two hours
- Binding 73 GB drives - approximately four hours
- Creating a file system - if you have no unbound LUNs, creating the file system
takes only a few seconds.
When the operation is complete, the Profile XP system is ready for testing.