Grass Valley PVS Series System Guide v.4.0 Dec 10 200 - Manual (Page 77)

Configuring storage to include hot spare drives
July 27, 2001 Profile XP System Guide 77
3. Bind drives as hot spares using the following steps:
a. Select an unbound LUN to use for hot spare drives.
If the drives you want to designate as hot spares are bound as part of a data LUN,
click
Unbind to change them to unbound status, then Bind .
b. Use the drop-down list to set the LUN type to Hot Spare.
c. Click Bind , then click OK in the dialog box.
“Bind Pending” appears next to the unbound LUN.
4. If there are unbound LUNs remaining in the LUN setup list, perform the following
steps, otherwise, proceed to step 4.
a. Select all Unbound LUNs. Use SHIFT or CTRL and click.
b. Verify the LUN type selected is Data .
c. Click Bind , then click OK in the dialog box.
The list now shows the Unbound LUN status as “Bind Pending”.