Grass Valley PVS Series System Guide v.4.0 Dec 10 200 - Manual (Page 174)

Chapter 7 Modifying a Channel: Timecode Settings
174 Profile XP System Guide July 27, 2001
5. Click the TC Generator button, then select a TC Generator from the list.
NOTE: Do not select “Any”. Choose a specific timecode generator and then
remember to use it for all subsequent channels you configure.
6. Repeat step 2 through step 5 for each channel that will use the same timecode
generator.
7. Click Finish to save your settings and close the Channel Configuration dialog box.
Refer to “Setting up an internal timecode generator” on page 175 to configure the
timecode generator.