Grass Valley PVS Series System Guide v.4.0 Dec 10 200 - Manual (Page 156)

Chapter 6 Modifying a Channel: Audio Settings
156 Profile XP System Guide July 27, 2001
3. If you selected embedded audio format, perform the following steps for each audio
channel input pair requiring embedded audio:
a. Click the left-hand drop-down list arrow in the Embedded column for the
channel pair you want to configure, and select a video input as shown.
NOTE: With one audio board, only the first 4 video inputs are selectable.
b. Click the right-hand drop-down list arrow in the Embedded column for the
channel pair you want to configure, and select an audio group and channel pair
as shown.
NOTE: Up to two audio groups (8 audio channels) can be extracted from a single
video input.
3. Click Finish to save your settings.