Grass Valley PVS Series System Guide v.4.0 Dec 10 200 - Manual (Page 219)

Configure the video network on each Profile XP:
July 27, 2001 Profile XP System Guide 219
3. Enter the IP address and Subnet mask for the video network Ethernet interface.
NOTE: Be sure to read all the information about choosing IP addresses for the
Fibre Channel video network option on page 202, “Choosing machine names and
IP addresses for your Ethernet video network”.
4. Enter the IP address for the gateway if used.
5. Select the error detection options you want to use. Enabling extra error detection
insures data transfer without corruption. Disabling extra error detection speeds up
network transfers.
6. Click Finish to save your settings.