Grass Valley PVS Series System Guide v.4.0 Dec 10 200 - Manual (Page 164)

Chapter 6 Modifying a Channel: Audio Settings
164 Profile XP System Guide July 27, 2001
Adjusting analog audio input level
You can use the analog input gain adjustment to correct the analog audio input signal
level. For instance, you can use the input gain adjustment to correct input audio level
before recording the source signal.
To adjust analog audio input level:
1. Select Analog Audio Input in the Configuration Manager window.
2. Select an audio input in the list to adjust or click Select All to adjust all inputs.
3. Use the slider in the Analog Audio Input dialog box to adjust input level.
Overload clipping indicates the audio level is greater than +23dbu.
4. Click Finish .