Grass Valley PVS Series System Guide v.4.0 Dec 10 200 - Manual (Page 155)

Changing the audio I/O format
July 27, 2001 Profile XP System Guide 155
Changing the audio I/O format
This section describes how to select the audio I/O format you need for your
system.The Profile XP system can be configured to operate with analog, AES/EBU
digital, and digital embedded (SMPTE 272M Level A) audio.
An interface chassis is required for analog audio and AES/EBU digital audio (see
“About Profile XP Audio” on page 149). If you are using only embedded audio, no
interface chassis is required.
Select audio input format
To select audio input format:
1. Click Audio Routing in the Configuration Manager window. The Audio Input
Routing dialog box appears.
2. Select the audio input format for each audio channel pair.