Grass Valley PVS Series System Guide v.4.0 Dec 10 200 User Manual
Page 191
Advertising
Setting up RS-422 remote control in VdrPanel
July 27, 2001
Profile XP System Guide
191
3. Choose
Controller | Configure
to open the Channel Configuration dialog box, then
select a control protocol using the
Protocol
drop-down list as shown.
4. Select a serial port using the port select drop-down list as shown. COM1 and
COM2 are RS-232 ports on the Profile XP rear panel. P1 through P8 are RS-422
ports on the I/O Panel.
Advertising
This manual is related to the following products: