Grass Valley PVS Series System Guide v.4.0 Dec 10 200 - Manual (Page 158)

Chapter 6 Modifying a Channel: Audio Settings
158 Profile XP System Guide July 27, 2001
2. Click the left-hand drop-down list arrow in the Embedded column for the channel pair
you want to configure, and select a video output as shown.
NOTE: With one audio board, only the first 4 video outputs are selectable.
3. Click the right-hand drop-down list arrow in the Embedded column for the channel
pair you want to configure, and select an audio group and channel pair as shown.
NOTE: Up to two audio groups (8 audio channels) can be embedded on a single
video output.
4. Click Finish to save your settings.