Grass Valley PVS Series System Guide v.4.0 Dec 10 200 - Manual (Page 157)

Select audio output format
July 27, 2001 Profile XP System Guide 157
Select audio output format
There are no output routing selections to make if you are using Analog or AES/EBU
audio. These formats are selected automatically when the system sees the audio
interface attached.
If you are using embedded audio, you must make embedded audio selections as
follows.
To select embedded audio output selections:
1. Click Audio Routing in the Configuration Manager window. The Audio Routing
dialog box appears.
2. Click Next to navigate to Page 2 of the Audio Routing dialog box as shown.
3. Select the check box in the Embedded column for all Profile XP audio channels that
require embedded audio.