Grass Valley PVS Series System Guide v.4.0 Dec 10 200 - Manual (Page 181)

Setting up the VITC reader on the Reference Input
July 27, 2001 Profile XP System Guide 181
3. Select one of the VITC timecode options as follows:
- Auto Detection - Select the Detect the VITC signal automatically check box, then
enter the range of lines you want the system to search for VITC using the sliders.
- Manual Detection - Clear the Detect the VITC signal automatically check box,
then type or select the line numbers where the VITC pair can be found.
4. Click Finish to save your settings.