Grass Valley PVS Series System Guide v.4.0 Dec 10 200 - Manual (Page 227)

Test the Ethernet video network using Media Man-
July 27, 2001 Profile XP System Guide 227
8. Use the following steps to transfer a clip over the network.
a. Double click on the icon of another machine on the network.
b. Double click on the volume icon (default name is “Ext”) in the same
machine. A default bin should be displayed.
c. Double click on the icon of the local machine on the network and then the
volume icon . If there are no clips on any machines, you can open VdrPanel
and create some. (See Profile XP User Manual for VdrPanel information.)
d. Click and drag a clip to a bin on another machine.Dragging a clip to a different
machine always results in a copy—the original clip is not deleted.
e. Repeat steps a through d until you have tested the network to your satisfaction.
NOTE: You can select the transfer monitor icon on the toolbar to open the
transfer monitor and watch the progress of the network transfer.
Now that you have tested the network connections for all Profile XP systems, you
are ready to use the video network.