Grass Valley PVS Series System Guide v.4.0 Dec 10 200 - Manual (Page 85)

Determining which disk modules make up a LUN
July 27, 2001 Profile XP System Guide 85
Determining which disk modules make up a LUN
Use the Identify button in the Disk Utility to determine which disk modules in the disk
array make up a LUN. Clicking the Identify button flashes the disk LEDs of all the
drives in the LUN. This is helpful in Profile XP systems with several Fibre Channel
RAID chassis connected, for instance in locating the drives bound as hot spares.
To determine LUN physical location:
1. Start Configuration Manager using the desktop shortcut or by selecting Start |
Programs | Profile Apps | Configuration Manager . The Configuration Manager
dialog box appears.
2. Click File System in the Configuration Manager window. Page 1 of the Disk Utility
dialog box appears.
3. Select a LUN in the LUN setup list.
4. Click Identify . The dialog box appears.
5. Locate the LUN physical location, then click OK to clear Identify mode.
6. Click Cancel to close the Disk Utility dialog box.