Grass Valley PVS Series System Guide v.4.0 Dec 10 200 User Manual
Page 179
Advertising
Setting up the VITC reader on a Video Input
July 27, 2001
Profile XP System Guide
179
4. Select one of the VITC timecode options as follows:
- Auto Detection -
Select the
Detect the VITC signal automatically
check box, then
type or select the range of lines you want the system to search for VITC.
- Manual Detection - Clear the
Detect the VITC signal automatically
check box,
then type or select the line numbers where the VITC pair can be found.
5. Click
Finish
to save your settings.
Advertising
This manual is related to the following products: