iSys iTerra Elite Color LED Printer - Manual (Page 100)

_________________________________________________________________________________________________________________________
PAGE 100 --- iTerra Elite Quick Start Guide
© 2008 iSys-The Imaging Systems Group Inc.
5. Check fuser unit:
a) If necessary, lift out the toner/drum cradle to access the
jammed page.
b) Release the fuser roller lock levers at either end of the fuser and
slowly remove the jammed paper.
c) Re-lock the levers at either end of the fuser.
WARNING: The fuser unit is very hot after printing. Always use the handle when lifting it.
6. If printer is equipped with Duplex unit:
a) Instructions for safe removal of continuous input media on tray and feeder, including cable conditions.
b) Open the front cover, then slide out the duplex unit.