iSys iTerra Elite Color LED Printer - Manual (Page 112)

_________________________________________________________________________________________________________________________
PAGE 112 --- iTerra Elite Quick Start Guide
© 2008 iSys-The Imaging Systems Group Inc.
IV. MISCELLANEOUS PROBLEMS
Power Is On-Printer Does Not Go Online
POSSIBLE CAUSE REMEDY
Bad connection
Switch off the printer and disconnect the power
cable. Reconnect power cable and switch
printer on. If this does not clear the fault, call
for service.
Print Processing Does Not Start
POSSIBLE CAUSE REMEDY
Printer error
Check the control panel. If an error message is
displayed, correct the problem.
Print Processing Cancels
POSSIBLE CAUSE REMEDY
The printer interface cable is faulty. Replace the printer interface cable.
The time out setting is too short. Reset time out to a higher value.
Printer Makes a Strange Noise
POSSIBLE CAUSE REMEDY
The printer is not horizontal. Place the printer on a stable, level surface.
There are scraps of paper or other foreign
matter inside the printer. Check the inside of the printer and remove any
such objects
The top cover is not firmly shut. Press the left and right sides of the top cover.