iSys iTerra Elite Color LED Printer - Manual (Page 4)

_________________________________________________________________________________________________________________________
PAGE 4 --- iTerra Elite Quick Start Guide
© 2008 iSys-The Imaging Systems Group Inc.
1. INSTALLATION
Follow the steps below to properly install the printer consumables and accessories.
I. INSTALLING CONSUMABLES AND PRINT MEDIA
Removing Protective Shipping Materials
1) Remove the two strips of shipping tape from the rear door paper exit.
2) Pull up the release latch and open the cover.
3) Remove the cardboard v-shaped shipping restraint from behind the LED heads.
Preparing the Image Drums