iSys iTerra Elite Color LED Printer - Manual (Page 98)

_________________________________________________________________________________________________________________________
PAGE 98 --- iTerra Elite Quick Start Guide
© 2008 iSys-The Imaging Systems Group Inc.
OR
If single sheet printing when jam occurs, Then :
1. Remove continuous input media tray from underside of continuous feed unit (caution concerning feeder
data/power cable).
2. Check paper tray – Pull out the paper tray and remove any jammed paper from the printer, then gently push the
paper tray back in.
3. For both operation modes:
Check the transfer belt – (a)Remove all four image drums as one unit in their cradle and place the cradle
on a flat surface to prevent damage to the shiny green surface on the bottom of the drums. (b) Carefully
remove any jammed paper from the transfer belt and top paper exit. (c) Replace all four image drums as
one unit into he printer.