iSys iTerra Elite Color LED Printer User Manual
Page 114
_________________________________________________________________________________________________________________________
PAGE 114 --- iTerra Elite Quick Start Guide
© 2008 iSys-The Imaging Systems Group Inc.
Printer Takes a Long Time to Start Printing
POSSIBLE CAUSE
REMEDY
The printer has to warm up returning from
power save mode.
In the printer menu settings, set power save to
a higher value to increase the length of time
before entering power save mode.
The image drum carries out a cleaning
process to ensure print quality, which takes
time.
Wait until this process has been completed.
The fuser unit adjusts temperature, which
takes time.
Wait until this process has been completed.
The printer is processing data from another
interface.
Wait until this data is processed.