iSys iTerra Elite Color LED Printer - Manual (Page 110)

_________________________________________________________________________________________________________________________
PAGE 110 --- iTerra Elite Quick Start Guide
© 2008 iSys-The Imaging Systems Group Inc.
Longitudinal Black Stripes
POSSIBLE CAUSE REMEDY
Image drum is damaged. Replace image drum.
Toner is low. Change toner cartridge. Change toner cartridge.
Periodic black lateral lines or spots.
• If the lines or spots occur at intervals of
approximately 44 - 94 mm, the image drum
(green tube) is damaged or dirty. If damaged,
replace the image drum cartridge. If dirty, wipe
the image drum gently with soft tissue. If this
does not work, replace the image drum.
• If the lines or spots occur at intervals of
approximately 113 mm, the fuser roller is
damaged. Change the fuser unit.
The image drum has been exposed to light.
Remove the image drum from the printer and
store it in a dark place for several hours. If this
does not work, replace the image drum.
Faint Shading on Unprinted Sections
POSSIBLE CAUSE REMEDY
Paper has been affected by static electricity.
Store paper within specified temperature and
humidity levels
Paper is too thick.
Use recommended paper.
Toner is low. Change toner cartridge.