iSys iTerra Elite Color LED Printer - Manual (Page 16)

_________________________________________________________________________________________________________________________
PAGE 16 --- iTerra Elite Quick Start Guide
© 2008 iSys-The Imaging Systems Group Inc.
III. CONNECT TO POWER
Note: When cycling the printer power (on-off-on), leave the printer power switch in the off position for at least
10 seconds to allow the printer to fully power down before turning it back on again.
1) Attach the power cord to the back of the printer.
2) Connect to grounded power socket.
3) Turn the printer on and wait for it to warm up. The printer will go through its initialization and warm up sequence.
When the printer is ready, the READY indicator comes on and stays on (green) and the LCD indicates ONLINE.