iSys iTerra Elite Color LED Printer - Manual (Page 105)

_________________________________________________________________________________________________________________________
PAGE 105 --- iTerra Elite Quick Start Guide
© 2008 iSys-The Imaging Systems Group Inc.
USB cable is disconnected or faulty.
Reconnect or try another cable.
A USB hub is being used.
The printer cannot be used with a USB hub.
Connect the printer and computer directly.
Printout Is Garbled or Incorrect With Parallel Connection
POSSIBLE CAUSE REMEDY
Possible mismatch on parallel connection
between computer and printer. Change parallel transmission mode (see
Parallel Transmission Mode above).
Cannot print
• LPT WRITE ERROR is displayed.
• PRNUSBX WRITE ERROR is displayed.
POSSIBLE CAUSE REMEDY
Interface is disabled.
In the printer menu settings, enable Parallel or
USB interface.
Printer is switched OFF. Switch ON.
Printer interface cable is disconnected.
Reconnect the printer interface cable.
A converter, buffer, extension cable or
USB hub is being used. Test by connecting the printer and computer
directly.
Printer driver output port is incorrect.
Set correct output port to which the printer
interface cable is connected.
Printer is not selected in the printer driver.
Select the printer or set to default printer.