iSys iTerra Elite Color LED Printer - Manual (Page 8)

_________________________________________________________________________________________________________________________
PAGE 8 --- iTerra Elite Quick Start Guide
© 2008 iSys-The Imaging Systems Group Inc.
5) Press the cartridge toward the left slightly, and then lower the right end, aligning the white tab with the groove in
the drum.
6) Push the lock lever toward the back of the printer until it stops.
NOTE: After installing a new toner cartridge, the message TONER LOW or CHANGE TONER may appear on the
display after the printer is turned on. If this message does not disappear after a few pages have been
printed, reinstall the appropriate toner cartridge.