iSys iTerra Elite Color LED Printer - Manual (Page 35)

_________________________________________________________________________________________________________________________
PAGE 35 --- iTerra Elite Quick Start Guide
© 2008 iSys-The Imaging Systems Group Inc.
2) Be sure the port with the iSys printer is selected then click CONFIGURE PORT. The Configure Port Screen will
look as displayed in the next diagram:
3) On the Configure Port screen change the IP address to the new setting.
NOTE: The Port Name cannot be changed by this procedure. If the Port Name was unacceptable, e.g. if it
includes the old IP address, to change it use Delete Port. The printer and port will have to be fully installed
again.
4) Click on the General tab and make a Windows test print or close the Properties box altogether and send a test
print from a Windows application.
Making a Printer a Shared Device