RIGOL DSA875 - Manual (Page 206)

RIGOL Chapter 4 Troubleshooting&Message
User’s Guide for DSA800 Series 4-14
executed because the version of the data is incorrect for the device. This
particular error message is always used when file or block data formats
can be recognized by the instrument but cannot be executed due to
version incompatibility. For example, an unsupported file version, an
unsupported instrument version.
-240 Hardware error.
Indicate that a legal program data or query could not be executed
because of a hardware problem in the device. This error message is
always used when the device cannot detect the more specific error
described in error -241.
-241 Hardware missing.
Indicate that a legal program data or query could not be executed
because the option was not installed.
-250 Mass storage error.
Indicate that a mass storage error occurred. This error message is always
used when the device cannot detect the more specific errors described in
errors -251 to -258.
-251 Missing mass storage.
Indicate that a legal program command or query could not be executed
because the mass storage was not installed.
-252 Missing media.
Indicate that a legal program command or query could not be executed
because no disk can be found.
-253 Corrupt media.
Indicate that a legal program command or query could not be executed
because of a bad disk or wrong disk formatting.
-254 Media full.
Indicate that a legal program command or query could not be executed
because there is not enough space on the disk.
-256 File name not found.
Indicate that a legal program command or query could not be executed
because the file to be read or copied does not exist.
-257 File name error.
Indicate that a legal program command or query could not be executed
because the name of the file to be copied is already in use.