Rugged Cams Workhorse DVR 4 Channel - Manual (Page 120)

119
On the selection box, set the audio channel using the arrow (ST) and [Select] buttons.
C) Server URL
Settings may be defined only in client NTP mode. Set the address of the NTP server or DVR time
server.
On the {NTP} menu, go to {1.2. Server URL} using the arrow (ST) buttons and press the
[Select] button.
On the selection box, set the server URL using the arrow (ST) and [Select] buttons.
The user can input the IP only when the server type is DVR. For the NTP server, Automatic, IP,
or URL should be selected.
Automatic
Attempts to connect to the server nearest to the user-defined zone or the next nearest server if
connection fails
IP
On the numeric data input window, enter the IP of the server to synchronize the time.
URL
On the text input window, enter the URL of the server to synchronize the time.