Rugged Cams Workhorse DVR 4 Channel - Manual (Page 87)

86
On the selection box, select ON or OFF using the arrow (ST) and [Select] buttons.
The Call Feature and the Spot Monitor are disabled in the Workhorse120-4 DVRs.
B) Mail
Used to send email to a predefined address in case of an alarm or an event
On the {Recording Setup} {Data 1~4} {Generate Alarm} {Mail} menu, go to the channel
using the arrow (STW X) buttons and press the [Select] button.
On the selection box, set an event to send an email using the arrow (ST) and [Select]
buttons. Multiple events may be selected.
To set all channels at the same time, go to Mail and press the [Select] button.
On the selection box, select ON or OFF using the arrow (ST) and [Select] buttons.