Rugged Cams Workhorse DVR 4 Channel - Manual (Page 74)

73
A) Save
Select the [Save] button by pressing the [TAB] and arrow (W X) buttons on the remote
control and press the [Select] button.
B) Save as
Save the current setting as multiple data from Data 1 to Data 4.
Select the [Save As] button by pressing the [TAB] and arrow (W X) buttons on the
remote control and press the [Select] button.
The user can select multiple data from Data 1 to Data 4. The selected data are then
displayed in green, and others, in blue.
C) Saving on the message window
Closing the window without saving the new recording setting causes a warning message to
appear as shown below:
Select [Yes] to save the new setting.
Yes Saves the current setting and goes back to the main setup screen
No
Goes back to the main setup screen without saving the current setting
Cancel
Cancels the current operation and goes back to the previous screen