Rugged Cams Workhorse DVR 4 Channel - Manual (Page 83)

82
On the selection box, set the sensitivity using the arrow (ST) and [Select] buttons.
Setting the sensitivity
Sensitivity levels include Lowest, Low, Middle, High, and Highest, indicating the
proportion of pixels to the motions being detected. The higher the grade, the more
accurate the detection of motion is.
B) Sensor
Defines the settings for detecting input from an external sensor compatible with the system
The user can set up to four external sensors. Once signal input is detected, the video of the
corresponding channel is recorded.
Sensor setting
On the {Recording Setup} {Data 1~4} {Event} {Sensor} menu, go to the channel using
the arrow (STW X) buttons and press the [Select] button.
To set all channels at the same time, go to
{Sensor} and press the [Select]
button.
On the selection box, set the input port number for the external sensor using the arrow (ST)
and [Select] buttons.
Sensor type setting