Rugged Cams Workhorse DVR 4 Channel - Manual (Page 127)

126
5-2-2.PTZ Setup
Sets the PTZ camera connected to the system
Menu CH
Displays the channel
Menu PTZ Setting the PTZ causes a camera icon to be displayed.
Camera name Displays the name of each channel
PTZ protocol Sets the protocol used to communicate with the PTZ camera
Camera ID ID set in the PTZ camera
Transmission type
Camera control cable type (RS-485)
Transmission rate
Communication speed (must be the same as the communication
speed specified in the manual for the PTZ)
Preset maintenance time Interval between the Preset as defined in the Tour feature and the
next Preset (unit: 5 ~60 seconds)
Tour Used to set the Tour feature (Tour 1 and Tour 2)
(1) PTZ protocol setting
The PTZ protocol is used for communicating with the PTZ camera.
On the {PTZ Setup} menu, select the {PTZ Protocol} sub-menu and go to the channel using
the
arrow (STW X) buttons. Afterward, press the [Select]
button.