Cobalt Co9992-4ENC-4K-HEVC Software-Defined Broadcast Encoder - Manual (Page 23)

23
Network Configuration RIST Tunnels Tab
This tab allows the creation and management of RIST Main Profile tunnels. The 9992-ENC
supports the creation of up to 4 RIST Main Profile tunnels. Creation of RIST tunnels requires
the
+RIST/ARQ-ENC license. RIST Main Profile tunnels use the GRE over UDP protocol.
In order to create a tunnel, check the
Tunnel Enable box below:
Once the box is checked, the tunnel parameters are shown:

Tunnel IP: this is the inner IP address of the encoder in the tunnel. It is not usually
necessary to configure this parameter.

Tunnel Mask: this is the subnet mask for the tunnel interface. It is not usually necessary
to configure this parameter.