Cobalt Co9992-4ENC-4K-HEVC Software-Defined Broadcast Encoder - Manual (Page 55)

55
encoder channel. Additional SDT parameters become available once this box is checked,
as depicted below.

Service Name: Enter the desired SDT service name for this encoder channel. The
default name is Slot X Encoder Y , where X is the openGear® slot number where the
9992-ENC is installed, and Y is 1 through 4 (for Encoder 1 through Encoder 4).

Provider Name: Enter the desired SDT service provider name. The default is Cobalt
Digital Inc .
If the encoding standard is set to HEVC and the encoder is configured for 10-bit operation, the
following two additional checkboxes become available:

PQ10 Content: if this box is checked, the SDT will signal that the video service contains
content in PQ10 format.

SL-HDR2 Content: if this box is checked, the SDT will signal that the video service
contains content in SL-HDR2 format. Note that, in this case, the PQ10 box must also be
checked. The encoder will enforce this by automatically checking the box. Conversely,
if the PQ10 box is unchecked, the SL-HDR2 box will also automatically be unchecked.