Cobalt Co9992-4ENC-4K-HEVC Software-Defined Broadcast Encoder - Manual (Page 35)

35
Video Inputs Statistics External Inputs Tab
The External Inputs tab shows the status of the actual encoder video inputs, as shown below.
For each video input, the following information is indicated:

Video Status: This shows what resolution and frame rate are detected in the video input.
If there is no signal lock (i.e., no detected SDI framing), this indicator will be red and
show
No lock .

Video Signal: This shows the type of signal detected. If there is signal, it will show the
signal type, between SD-SDI, HD-SDI, 3G-SDI, 6G-SDI and 12G-SDI. If there is no
signal, it will show
No signal .

Video Errors: This shows a running count of the CRC errors in that input. Hitting the
Clear Error Counters button in the Video Inputs Configuration Tab resets this count to
zero.
Video Inputs Statistics Encoder Inputs Tab
The Encoder Inputs tab shows the status of the internal encoder instances inputs. The individual
fields are:

Input Lock 1/2: This shows the status of the internal timing generators, as follows:
o If the Framesync is disabled ( Enable Framesync is not checked in the Video
Inputs Configuration Tab), this will show the timing lock status of video inputs 1
and 2. The two possibilities are:

: The input has timing lock.

: The input has no timing lock.