Cobalt Co9992-4ENC-4K-HEVC Software-Defined Broadcast Encoder User Manual
Page 57
57
IP Outputs Tab.
In order to connect to a given port, simply check the box in front of that port. A given encoder
channel can be connected to more than one port. Note that if multiple encoder instances are
connected to the same port, the output will be a Multi-Program Transport Stream (MPTS). The
internal mux will resolve any PID conflicts by remapping and adjusting tables. SDT information
will be merged.
The
Stream Display
selector controls how streams are displayed. The picture above shows the
Stream Names
, where the ports are identified by their names (which are configurable).
Selecting
Stream Addresses
shows the destination IP Address and UDP ports, as illustrated
below.
Ports created in the
IP Outputs Tab
ASI Ports are always
available