Cobalt Co9992-4ENC-4K-HEVC Software-Defined Broadcast Encoder User Manual
Page 93
93
The Basic view includes the following:
Enabled:
The configured value of this parameter.
TS Bit Rate (b/s):
This column provides the current bit rate of the output transport
stream. This does not include UDP and IP overhead, nor RTP/FEC overhead.
UDP Port:
The configured value of this parameter.
Destination Address:
The configured value of this parameter.
RTP:
The configured value of this parameter
FEC:
Summary of the FEC configuration. If FEC is disabled, this field will indicate it as
Off
. If FEC is enabled, this field will indicate the FEC matrix size as Columns × Rows,
and the protection mode as
C
for Column Only or
R-C
for Row and Column. In the
example above, Stream 1/1 has Column Only FEC with 1 Column and 4 Rows, and
Stream 2/1 has Row and Column FEC with 4 Columns and 10 Rows.
Stream Name:
The configured stream name.
Edit Stream:
If you click on this button, you can modify all the parameters for this
output. The configuration area will re-open with the current output settings.
Delete Stream:
If you click on this button, the stream is deleted and removed from the
table.
When the Advanced view is selected, additional fields appear in the table, as depicted below: