Cobalt Co9992-4ENC-4K-HEVC Software-Defined Broadcast Encoder - Manual (Page 63)

63

Base File Name: this field is the same as in HLS Remote Server–FTP or SFTP Transfer,
and the same files will the transferred. The final HTTP URL will be the concatenation of
the
Upload URL field, the base file name, and the extensions described above.
Output Tab–RTMP
The 9992-ENC can operate as an RTMP client, and publish a real-time, live bitstream to an
RTMP server. The 9992-ENC can generally connect to the same servers as the Adobe Flash
Live Media Encoder (FMLE).
An RTMP server publishing point is defined by the following:

An RTMP URL, of the form:
rtmp[t][e][s]://servername/app

A stream name
The first part of the URL defines the protocol, as follows:
 rtmp : standard RTMP with no security
 rtmpt : RTMP tunneled over HTTP
 rtmpe : encrypted RTMP using proprietary security
 rtmps : encrypted RTMP over SSL

rtmpte : encrypted RTMP using proprietary security, tunneled over HTTP
 rtmpts : encrypted RTMP over SSL, tunneled over HTTP
The
servername field is the host name or IP address of the RTMP server to be contacted. The
app field is the application in the server that should receive the data being transmitted. Note
that, depending on the service, the app field may contain a complete path or even a set of
parameters.
The 9992-ENC encoder can be configured with primary/backup RTMP servers. If it cannot
connect to the primary server, it will automatically try the backup.
The RTMP configurable parameters are: