Enlarge and print – Canon imagePROGRAF TM-300 36" Large-Format Inkjet Printer with L36ei Scanner Kit User Manual

Page 567

Advertising
background image

6.

Complete the setup

Click

OK

.

When printing is executed, a drapery or banner can be printed according to the roll.

Enlarge and print

1.

Register user-defined paper

Register both the actual desired print size (user-defined paper 1) and original document size created
in application (user-defined document size 2) in the

Size Options...

under the

Page Setup

tab.

Note

• Please set user-defined paper 2 to the same aspect ratio as user-defined paper 1. If the aspect

ratio differs, the enlarged image may not turn out to be the expected size.
After creating user-defined paper 1, if user-defined paper 2 is created after checking

Fix the

Ratio of the Width to Height

, settings can be set to the same aspect ratio.

Also set user-defined paper 2 to a size that doesn't exceed the maximum size supported by the
application.
For example, when printing on paper 600mm wide and 3,000mm long, use the following
settings.
(when setting length to 1/6 the user-defined paper)

• User-defined paper 1:

Width

600mm,

Height

3,000mm

• User-defined paper 2:

Width

100mm,

Height

500mm

2.

Create original document in application software

Use registered user-defined paper 2 to create original document in application software.

3.

Open printer driver settings screen

567

Advertising