Lexmark CX622ade Color Laser Printer - Manual (Page 70)

Menu item Description
E
‑
mail Alerts Setup
E
‑
mail Setup
Device
‑
Initiated E
‑
mail
None*
Use Device SMTP Credentials
Set whether credentials are required for device
‑
initiated
e
‑
mails.
Note: This menu item appears only in some printer models.
E
‑
mail Alerts Setup
E
‑
mail Setup
User
‑
Initiated E
‑
mail
None
Use Device SMTP Credentials
Use Session User ID and Password
Use Session E
‑
mail address and
Password*
Prompt user
Set whether credentials are required for user
‑
initiated e
‑
mails.
Note: This menu item appears only in some printer models.
E
‑
mail Alerts Setup
E
‑
mail Setup
Use Active Directory Device Credentials
Off
On*
Enable user credentials and group designations to connect to
the SMTP server.
Note: This menu item appears only in some printer models.
E
‑
mail Alerts Setup
E
‑
mail Setup
Device Userid
Specify the user ID to connect to the SMTP server.
Note: This menu item appears only in some printer models.
E
‑
mail Alerts Setup
E
‑
mail Setup
Device Password
Specify the password to connect to the SMTP server.
Note: This menu item appears only in some printer models.
E
‑
mail Alerts Setup
E
‑
mail Setup
Kerberos 5 REALM
Specify the realm for the Kerberos 5 authentication protocol.
Note: This menu item appears only in some printer models.
E
‑
mail Alerts Setup
E
‑
mail Setup
NTLM Domain
Specify the domain name for the NTLM security protocol.
Note: This menu item appears only in some printer models.
E
‑
mail Alerts Setup
E
‑
mail Setup
Disable “SMTP server not set up” error
Off*
On
Disable an SMTP setup error message to appear on the
display.
Note: This menu item appears only in some printer models.
Error Prevention
Jam Assist
Off
On*
Set the printer to flush blank pages or pages with partial prints
automatically after a jammed page has been cleared.
Note: An asterisk (*) next to a value indicates the factory default setting.
Understanding the printer menus 70