Panasonic MN101C77C - Manual (Page 502)

Chapter 17 Appendices
XVII- 2 Probe Switches
17-1 Probe Switches
17-1-1 PRB-MBB101C77-M
- This probe must be used with the following boards.
- Connector board: PX-CN101-M
- MBB board: PRB-MBB101C77-M
- Adapter board: PRB-ADP101-64-M
- Dummy target: PRB-DMY101C77-M
The dummy target should be connected when ICE is operated independently, the adapter
board should be connected at connection to the target.
The power supply voltage of ICE is between 3.0 V to 3.6 V.
- This probe is mounted the switches for mask option.
- The option switches are not available.
Option
Switches
O
N OP0
OP1
OP2
OP3
OP4
OP5
OFF
OFF
OFF
OFF
OFF
OFF
Default control
Top view of MBB board
Figure1: Layout of option switches
- At connection to the target
-When ICC is operated independently
Adapter board
[PRB-ADP101-64-M]
MBB board
[PRB-MBB101C77-M]
Connector board
[PX-CN101-M]
Dummy target
[PRB-DMY101C77-M]
Figure2: Composition with PRB-MBB101C77-M