Panasonic MN101C77C - Manual (Page 504)

Chapter 17 Appendices
XVII-4 Probe Switches
17-1-3 PRB-ADP101-64-M
When connected to the target, use this board with MBB board.
This board can be used with the following boards.
(The product type is subject to change without prior notice. The latest information should
be confirmed on our web site.)
- PRB-MBB101C52-M
- PRB-MBB101C58-M
Improper matching may cause any damage to the ICE.
Figure1: PRB-ADP101-64-M Layout
<
How to connect
>
MBB board: PRB-MBB101
∗∗∗-M
Make sure that the points
marked are put together.
[ Caution1 ]
Connector board: PX-CN101-M
Adapter board: PRB-ADP101-64-M
[Caution1] Connect CNE of PRB-MBB101
∗∗∗
-M to CNE of PRB-ADP101-64-M, and CNF of
PRB-MBB101
∗∗∗
-M to CNF of PRB-ADP101-64-M.
When connecting the boards, make sure that they are connected without tilt.
If you put pressure on one side of the board, that may cause any damage to the pins.