1-4 prb-dmy101c77-m, How to connect – Panasonic MN101C77C User Manual
Page 505
Chapter 17 Appendices
Probe Switches XVII-5
17-1-4 PRB-DMY101C77-M
Dummy target boards differ depending upon the models. This board can be used for only
101C77 64PIN.
When unconnected to the target, use this board with the
PRB-MBB101C77-M
.
Improper matching may cause any damage to the ICE.
Figure1: PRB-DMY101C77-M Layout
<
How to connect
>
Connector board:
PX
-
CN101-M
MBB board:
PRB-MBB101C77-M
Dummy target:
PRB-DMY101C77-M
Make sure that the points
marked are put together.
[Caution1]
[Caution1]
Connect CNE of PRB-MBB101C77-M to CNE of PRB-DMY101C77-M, and CNF of
PRB-MBB101C77-M to CNF of PRB-DMY101C77-M.
When connecting the boards, make sure that they are connected without tilt.
If you put pressure on one side the board, that may cause any damage to the pins.