Nortel Networks Modular ICS 4.0 - Manual (Page 104)

92 / Forwarding your calls
Modular ICS 4.0 System Coordinator Guide P0881591 Issue 01
Displays while canceling redirection
How Line Redirection is different from Call Forward
Call Forward forwards all calls that arrive at a particular
telephone to another telephone within the Norstar system. Line
Redirection redirects only the lines you specify, no matter
which telephones they appear on, to a telephone outside the
Norstar system. Line Redirection takes precedence over Call
Forward.
Using Line Redirection
You redirect lines at a telephone, but once redirected, the lines
are redirected for the entire system.
You can redirect only lines that appear at line buttons on your
telephone.
You can answer the telephone if it rings while you are in the
middle of programming Line Redirection, but none of the
Norstar call handling features are available until the feature
times out. If you need to use a Norstar feature to process the
call, quit Line Redirection programming by pressing
ƒ. Do not press ® or you disconnect the call you
are trying to process.
Press the lines that are no longer to be
redirected. The lines light up as you press
them. Once you cancel redirection for a
line you cannot restore it by pressing the
line again. Press
ALL to cancel redirection
for all your lines. When you are finished,
press
˙
or OK .
Continue to press the lines that are no
longer to be redirected. Press
˙
or OK when you are finished.
For other displays, see “Common feature displays” on page 203.
Select line(s)
QUIT
ALL
Select line(s)
ALL OK
p0881591.book Page 92 Wednesday, August 19, 1998 6:43 PM