Nortel Networks Modular ICS 4.0 - Manual (Page 215)

P0881591 Issue 01 Modular ICS 4.0 System Coordinator Guide
Common feature displays
You may see the following displays when you use a feature.
Someone is already using programming, or
the feature you are trying to use is not
compatible with the configuration of the
telephone or line.
You have tried to use a feature, but you have
not been given access to it in administration
programming.
You have taken more than 15 seconds to
press a button in response to a display.
You have entered a feature code that is used
by an application program that your system
does not have.
You have entered an invalid feature code.
You have tried to use a feature that is not
available in the present setup of your Norstar
system.
You cannot use the feature you have chosen
because your telephone is locked. See
“Using Set lock” on page 178.
Press £ or press VIEW‚ or ·VIEW t o view a
number that is too long to fit on the display.
Press
˙ or OK when you are
finished.
This indicates a long distance call. (May be
available with Call Display services.)
You are receiving an internal call from
telephone 239 forwarded by telephone 221
or you have an Answer button for telephone
221 and an internal call from 239 is ringing
on 221.
Access denied
Denied in admin
Feature timeout
Inactive feature
Invalid code
Not available
Set locked
1234567890123...
VIEW‚ OK
§
239>221
p0881591.book Page 203 Wednesday, August 19, 1998 6:43 PM