Nortel Networks Modular ICS 4.0 - Manual (Page 30)

18 / Frequently used programming operations
Modular ICS 4.0 System Coordinator Guide P0881591 Issue 01
Choose a speed dial code
Add or change the telephone number
Select a line for the speed dial code
Press ¤‹fl›fl .
Press ‘ three times.
Press ≠ .
Press
‚⁄
.
You can pick any system speed dial code between 01 and 70.
Press ≠ .
Press CHANGE .
Use the dial pad to program the telephone number
that you want to add. The telephone number can be
up to 24 digits long.
Your display shows the telephone number, and not
n’s as shown here. Press
OK .
Press
‘
.
Press CHANGE to see your options: Use prime line , a
specific line (for example Use line: 01 ), a line pool
(for example Pool code:71 ), or Use routing tbl .
Stop pressing CHANGE when the display shows the prime line again.
Password:
RETRY
Terminals&Setsˆ
Sys Speed Dialˆ
Speed dial #:___
LIST
Speed dial #:01ˆ
FIND
01:No number
CHANGE
01:___
CANCL
OK
01:nnnnnnnn__
CANCL
BKSP OK
01:nnnnnnnn
CLR
CHANGE
Use prime line
CHANGE
p0881591.book Page 18 Wednesday, August 19, 1998 6:43 PM